Closed Monday for medical reasons. Normal service resumes Tuesday. Thank-you

Description


 


3W-85Xi TS CS


 

A good choice for : Aerobatic models, Scale models or airplane models for towing Sailplanes. The crankshaft with its 3 ball bearings convinces with soft running characteristics. With a suitable 3W-muffler system a power out put is possible which is close to competitor engines with 100ccm capacity. Due to the weight to power ratio the engine is suitable for a wide range of models. Characteristics are its long life, power and reliability.

TS ‚ÄìVersion ( Twin Spark , 2 spark plugs per cylinder ) convinces with a low idle and softer running characteristic.  All boxer engines with this set up have a better reliability. In case 1 ignition will fail the 2nd. ignition - which operates autonomously ‚Äì allows the engine to run further with reduced RPM ( 200 ‚Äì 300).

3W-CS-Serie ( Competition Series ) is characterized by better performance, throttle response and more power and torque. Selected parts are used for these engines. This results in a higher performance level. Transfer ports of the cylinder and crankcase are modified as well as the exhaust port.

The micro processor controlled igniton allows to easy start  the engine. The programmed timing curve is laid out for the engines and guarantees a good running characteristic in all RPM ‚Äì ranges. An out put signal to monitor RPM is standard as well as a LED showing the status of the ignition. The voltage range of the standard ignition : 4,8V ‚Äì 8,4V ( 2 cell LIPO battery ). Operating Voltage : 6,0 V.


 


Techn. specifications


Cylinder capacity

5.11 cu in

Power

10.35 HP

Power Rating

7.72 KW

Bore Diameter

2.00 inch

Stroke

1.61 inch

Speed range

1100 - 8500 rpm

Weight

5.28 lbs, incl. Ignition

Crankshaft

3 bearings

Oil / Gasoline Ratio

1 : 50 / 2% Mix

IIS - Ignition

4.8 - 7.4 V

Propeller 2-bladed

26x10; 26x12; 28x10

Propeller 3-bladed

23x12; 24x10; 24x12
Product form

3W-85Xi TS CS Single Cylinder Petrol Engine

£1,169.00Incl. VAT

SKU: 10.001.030

  • Official UK stockist

  • Fast, reliable Worldwide shipping

  • Trusted by pilots since 1993

    Description


     


    3W-85Xi TS CS


     

    A good choice for : Aerobatic models, Scale models or airplane models for towing Sailplanes. The crankshaft with its 3 ball bearings convinces with soft running characteristics. With a suitable 3W-muffler system a power out put is possible which is close to competitor engines with 100ccm capacity. Due to the weight to power ratio the engine is suitable for a wide range of models. Characteristics are its long life, power and reliability.

    TS ‚ÄìVersion ( Twin Spark , 2 spark plugs per cylinder ) convinces with a low idle and softer running characteristic.  All boxer engines with this set up have a better reliability. In case 1 ignition will fail the 2nd. ignition - which operates autonomously ‚Äì allows the engine to run further with reduced RPM ( 200 ‚Äì 300).

    3W-CS-Serie ( Competition Series ) is characterized by better performance, throttle response and more power and torque. Selected parts are used for these engines. This results in a higher performance level. Transfer ports of the cylinder and crankcase are modified as well as the exhaust port.

    The micro processor controlled igniton allows to easy start  the engine. The programmed timing curve is laid out for the engines and guarantees a good running characteristic in all RPM ‚Äì ranges. An out put signal to monitor RPM is standard as well as a LED showing the status of the ignition. The voltage range of the standard ignition : 4,8V ‚Äì 8,4V ( 2 cell LIPO battery ). Operating Voltage : 6,0 V.


     


    Techn. specifications


    Cylinder capacity

    5.11 cu in

    Power

    10.35 HP

    Power Rating

    7.72 KW

    Bore Diameter

    2.00 inch

    Stroke

    1.61 inch

    Speed range

    1100 - 8500 rpm

    Weight

    5.28 lbs, incl. Ignition

    Crankshaft

    3 bearings

    Oil / Gasoline Ratio

    1 : 50 / 2% Mix

    IIS - Ignition

    4.8 - 7.4 V

    Propeller 2-bladed

    26x10; 26x12; 28x10

    Propeller 3-bladed

    23x12; 24x10; 24x12