Description
Xpwr 60CC Motor
Product Information
Xpwr 60cc- This motor is for our 88"-94" models on 12s lipo and 160HV speed controller. 12S Lipo operation and 160 Amp HV speed controller minimum. 60CC notes: Our testing carried out on Castle firmware V4.22, expect 130 amps on fresh lipo packs using largest prop, for approximately 6,000 watts.
Specifications
Weight: 1168 grams (including radial mount and prop adapter)KV: 190
Pole: 24 Stator Poles
Bullet connectors: 8.0 mm female installed, male bullet connectors included
Recommended prop: 23 x 10, 24 x 10, 24 x 12
Note on using largest prop recommendation for each motor: The largest prop recommendation for each motor is a maximum-performance prop for 3D and extreme aerobatic flying. It is not needed or recommended for sport flying where long, sustained full-throttle usage is intended. It is for aerobatic flight where full-throttle is used in bursts.
Maximum temperature (on outside of motor): 175F / 80C
Download the Xpwr motor manual here (Right-Click & Save As)
Xpwr 60CC Motor
£389.99Incl. VAT
Description
Xpwr 60CC Motor
Product Information
Xpwr 60cc- This motor is for our 88"-94" models on 12s lipo and 160HV speed controller. 12S Lipo operation and 160 Amp HV speed controller minimum. 60CC notes: Our testing carried out on Castle firmware V4.22, expect 130 amps on fresh lipo packs using largest prop, for approximately 6,000 watts.
Specifications
Weight: 1168 grams (including radial mount and prop adapter)KV: 190
Pole: 24 Stator Poles
Bullet connectors: 8.0 mm female installed, male bullet connectors included
Recommended prop: 23 x 10, 24 x 10, 24 x 12
Note on using largest prop recommendation for each motor: The largest prop recommendation for each motor is a maximum-performance prop for 3D and extreme aerobatic flying. It is not needed or recommended for sport flying where long, sustained full-throttle usage is intended. It is for aerobatic flight where full-throttle is used in bursts.
Maximum temperature (on outside of motor): 175F / 80C
Download the Xpwr motor manual here (Right-Click & Save As)