Sebart Mini BAE Hawk 1.4M Red Arrows

Sebart Mini BAE Hawk 1.4M ARF 90mm EDF/P20 Turbine

Product Information

The all new Bae Hawk Jet ARF was designed by Italy aerobatic pilot Sebastiano Silvestri. This sport ARF jet-model design is based real aircraft design and modifided adding the ultimate aerodynamically ideas of the modernst pattern models and using the 15 years experience in flying jets of Seba.... the result is surprising!

This innovative design combined with the lightweight structure, the fiberglass fuselage and all wood airframe wings and stabs, give the Mini Bae Hawk Jet ARF an impressive precision and smoothness at any airspeed and flight condition. Thanks of his low wingload and the powerfull 90mm 12 blades EDF-6S or the P20 micro turbine, it can be a fantastic aerobatic jet-trainer… let you surprise from your new Bae Hawk Jet ARF !


Specifications:
Wingspan: 50.98 inches (1295mm)
Length: 67.08 inches (1400mm)
Wing Area: 496 Sq. in.

EDF-6S:

Weight (less battery): 3.000g

Weight RTF (with 5800-6S): 3.850g

90mm 12 blades aluminum EDF unit, 1750 Kw motor, 138A ESC with 8A bec 6V (SEBART item # 140-11 set)

P20 Turbine

: Weight (empty, less RX and Turbine battery): 3.250g

Recommended set up RTF: 

2 x 1800-2S lipo for RX and turbine

For RX, Power Box DIGISWICH or SENSOR with 5.9v regulator

option conversion turbine set (SEBART item # 140-16), include tank 650cc, trust tube and adapter plywood plates and screws.

Required radio system:

• Minimum 6-channel radio system (better 9ch)

• 7 micro servos 17g. for elevators, ailerons, flaps and rudder

• 3 servos 12g. for doors and steering are factory installe

• full extension set are included in the optional servo set (item # A140-12 set)

Recommended Li-Po battery pack for best performance with EDF:

• 5000-6S or 5800-6S High C-rate