AR SmartBus RRS ARXL - multi-protocal (Pin & Flag switch incl.)

Supports multiple Protocols

What do you fly, Futaba, JR/DFA, Spektrum, Graupner, Jeti or Multiplex. Whatever you fly, Smart Bus has you covered. With the ability to change the protocol at the touch of a button, the Smart Bus RRS system can be easy changed from model to model with different receivers in each.


SPECIFICATIONS:

  • Redundant Receiver system – works with dual or single receiver system
  • Mutli-protocol support SBus2,DSMX,XBus,HoTT and EXBus
  • Telemetry ready
  • 26 fully programmable and assignable channels
  • Works with single or dual battery configuration.
  • Works with all battery chemistries. LiFe. LiPo, Lion, NiMh, NiCD.
  • Full Dual Battery Redundancy - If one battery fails the other battery takes full control..
  • Vibrant Colour 2.4inch diagonal touch screen with 64k colour
  • Screen case dimensions 3.4 x 2.0 x 0.5 inches (86 x 50 x 12)mm
  • Smart Bus dimensions 4.2 x 3.0 x 0.9 inches (107 x 78 x 23)mm
  • Smart Bus weight (108gms) without colour screen.
  • Triple regulator design with dual 100A power regulator FETS.
  • Multi-match technology.
  • Advanced Radio Proprietary Smart Bus algorithms.
  • Optional sequencer package providing 3 sequencers.

Twenty Six fully assignable and programmable outputs

Looking at that next big project and wondering how you’re going to power all those servos, the Smart Bus RRS system is equipped with 26 fully programmable outputs, all via a single cable connected to your receiver. Each channel is freely assignable to any input and can be reversed and matched to any other channel on the Smart Bus RRS. Building that next giant scale model Smart Bus RRS has got it covered.

Easy to Use

Smart Bus RRS comes with pre-configured channel mapping that matches your chosen radio brand so model setup is really simple. Of course for advanced setups all 26 channels can freely assigned to any transmitter channel. 

Telemetry ready

Smart Bus RRS gives you live feedback of both your batteries on your radio. Monitor the voltage and capacity used out of each of your batteries at any time during the flight. Ensure your batteries are ready for the next flight.*

The Next standard in servo Matching.

In the RC industry precision is key. How can you expect to be precise when no two servos are identical, giving you varied results no matter how well you mechanically match them. Match your servos across 15 individual points, with 8000 step resolution and you can finally achieve matched perfection on your elevators, flaps, multi-engines and more. Take the hassle out of your new setup and have a model that raises your skills.

Sub-trim and reverse on all outputs

Ever spent hours, mechanically matching servos and never being able to get them just right or had to use a separate channel on your receiver, just to reverse a servo. With our intuitive and simple setup you can easily sub-trim at the centre and end-points of all your outputs on the Smart Bus RRS. Using Smart Bus RRS you can individually reverse your servos at a touch of a button. Smart Bus RRS gives you ultimate power at your fingertips.

Regulated voltage gives you precise, repeatable, results.

It is hard to be the best with a model that changes. With our high powered 220A regulator FETS we remove the change and give you pure constant regulation. As batteries are used their voltage drops, changes in voltage mean changes in speed and power of your servos. Regulating ensures your model is the same time after time.

RRS - Redundant Receiver technology

Smart Bus RRS is the safest in signal sharing technology, the redundant receiver system ensures your model by utilising two receivers. Unlike other power systems Smart Bus RRS reads signal from both receivers at all times and runs an intelligent algorithm to select the best signal.

In the unlikely event that a receiver fails then Smart Buss switches to the better receiver in less than one signal frame to ensure you will have constant control of your model. Reliability is key with models today, with our redundant receiver system you can ensure your model is always reporting back to you.

With Smart Bus all receiver events are recorded and remain even when powered down so you can review receiver health and signal strength between flights.

 Vibrant colour touch screen display.

Gone are the days of fiddly buttons and rotating dial frustrations, no more bind plugs and small screw drivers needed. The vibrant Smart Display gives you feedback and simple programming all in one touch screen display. With intuitive buttons and a single setup design. Your model will be in the air before you know it.

Triple Sequencer

Smartbus RRS ARXL comes with an option of 3 sequencers.

  • Sequencer 1 (Gear Sequencer) gives you 9 sequencer channels freely assignable to any of the 26 servo outputs.
  • Sequencer 2 (Canopy Sequencer) gives you 4 sequencer channels freely assignable to any of the 26 servo outputs.
  • Sequencer 3 (Aux Sequencer) maybe for bomb drop or Speed brake and chute deployment gives you an additional 4 sequencer channels freely assignable to any of the 26 servo outputs.

Smartbus ARXL - Giant Scale RC just got better. 

To see all the Advanced Features in detail please download the user guide

download the SmoothFlite Instruction from this link


Write a review

Note: HTML is not translated!
    Bad           Good

AR SmartBus RRS ARXL - multi-protocal (Pin & Flag switch incl.)

  • Brand: Advanced Radio
  • Product Code: BRC732
  • Availability: Out Of Stock
  • £379.99

  • Ex Tax: £316.66

The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Phone