Extreme Flight 76" MXS
The Extreme Flight MXS is loaded with unique features, including first rate hardware, components and thorough instructions to ensure a trouble free assembly and set-up.
Weight saving components are used throughout, such as carbon fiber structural reinforcement, carbon fiber wing and stab mounting tubes, carbon fiber landing gear, titanium pushrods and a carbon fiber tail wheel assembly, all ensuring the lightest, most high performance aircraft possible.
You will notice there is a box built into the bottom of the glow/gas version of the MXS fuselage. This is a pipe tunnel and will accommodate most canister mufflers and tuned pipes sold for the current makes of 30-40cc gas engines.
Designed to use an Electric set up that delivers 3000 Watts on 10S using an APC 22x10 (depending on battery and motor used) and a matching 90 Amp or higher controller.
SpecificationsWingspan: 76 inches w/o wingtips 83 inches with wingtips
Length: 78 inches
Wing Area: 1206 sq. in. w/o wingtips 1260 sq. in. with wingtips
Weight: 11.5 - 12.5 lbs
Power SystemDesert Aircraft DA 35
FlowMaster 12 or 14 oz. fuel tank
EF Fuel Dot
Spinner3 inch (76 mm)
RadioModern computer radio
ServosQty. 5 full size, metal gear hi-torque servos. Saxox-1270 recommended.
Qty. 1 throttle servo, Savox SB-2272MG recommended.
Servo ArmsQty. 2 Extreme Flight 1.5" single servo arms (tapped 3mm) for ailerons
Qty. 2 Extreme Flight 2" single servo arms (tapped for 3mm) for elevator
Qty. 1 Extreme Flight 4" double servo arm (tapped for 3mm) for pull-pull rudder
Servo ExtensionsQty. 2 Extreme Flight 20 AWG 12 inch for Ailerons
Qty. 2 Extreme Flight 20 AWG 6 inch for Rx to Ailerons
Qty. 2 Extreme Flight 20 AWG 36 inch for Elevators. 36" Extensions required if stabs are to be removed for transport