3W Installation Tips

• Minimum distance 100mm between ignition and receiver battery
• Protect ignition cable only with spiral plastic band
• Never remove sparkplug connector with mechanical aids
• Remove sparkplug connector by twist/pull movement
• Spark pug connector has to have a firm and save sit on sparkplug hexagon.
• If this is not the case; radio interference
• Use only ignition on/off switches recommended by 3W
• Battery operating voltage not below 4,8V
• Use high quality servo for throttle operation of carburettor
• Use same inside diameter for tank ventilation and carburettor fuel line
• Tank setup for engines with two carburettors:
• each craburettor has to have its own fuel-line end fels tank filter!
• both tankfilters have to bind together with gas resistent small plastic straps, when using one big tank
• in case of space problems, two small tanks can be used