Follow US 
Central Hobbies Carbon Pushrod Set 36" x 3MM
Product Code: CHMPRS36M3
SKU:
Reward Points:
Stock:
Ex Tax: £16.13
Central Hobbies Carbon Pushrod Set 36" x 3MM
Central Hobbies Original Carbon Fiber Push Rods Beat Fiber Glass, Steel, Wood, & All Imitations!
Our Carbon fiber rods are also available in .210" outside diameter (just under 1/4"), and 38" long with 4-40 and 6-32 fittings for the largest aircraft. Call us to order!
Compare the weight: A 12 inch section of the 5/32" CH Carbon pushrod stock weighs THREE GRAMS. Add the pair of Titanium fittings and total weight is only 4.5 grams plus a small amount of adhesive*.
Compare this to the typical "standard" 12 inch threaded 4-40 rod at TEN GRAMSwithout any clevis or pushrod fitting! Add one solder-on threaded end (do you like to solder?) and it's over 13 grams without a clevis.
The carbon fiber 1/8"rods come in 35" lengths, and the 5/32" rods are provided in 24" lengths. At full length on the 1/8" rods, you'll want to run a bushing to support the rod in the center. At lengths under 16 inches no support is needed to have rigidity superior to 4-40 rods.
The 3/16" diameter rods which are 3 feet long, solve the problem of the "longer runs" found in setting up the Dual Elevator Bell Cranks. Thread sizes available for the 3/16" rods are 4-40 and 6-32.
Add JB Weld To Attach the Fittings With Great Success.
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: